SUQPACK

SUQPACK

+90 282 999 99 99
Get a Quote

Cup Water Packaging Machine

H20 Cup Water Filling and Sealing Machine.

Home / Machines / Cup Water Packaging Machine / H20 Cup Water Filling and Sealing Machine
H20 Cup Water Filling and Sealing Machine
H20

High-output automated production with a 20-cavity mould

The H20 cup-water filling and sealing machine forms cups from PET bottom film, doses the product, heat-seals the top foil and cuts the packs in one continuous production flow.

  • 20-cavity mould
  • 20–25 cycles/minute
  • 304–316 grade stainless-steel construction
  • Forming, filling, sealing and cutting in one line
Get a Quote

How does the H20 cup-water packaging machine work?

Production starts by feeding PET bottom film into the machine. The film is heated under control and formed into cups in the 20-cavity mould. The cups are filled to the target amount, heat-sealed with top film or foil and separated at the cutting station.

The stated 20–25 cycles/minute is the machine’s mechanical cycle range. Net hourly output is determined by product flow, fill volume, film structure, cup geometry and downstream equipment.

Complete automation in one line

Forming, filling, sealing and cutting stations operate in one production flow.

Controlled filling

The filling system is selected for product properties and target portion to support repeatable dosing.

Hygiene-focused construction

Stainless steel is used on product-contact and critical machine-body areas.

Project-specific configuration

Mould, filling unit, film structure and options are selected for the product sample and target output.

Production process: from film to sealed cup

  1. Film feeding and heating

    PET bottom film enters the line under controlled tension and is prepared for forming.

  2. Cup forming

    The heated film is formed into the specified cup geometry in the 20-cavity mould.

  3. Precise filling

    A product-specific filling unit doses the target amount into every cavity.

  4. Foil sealing

    The top film is sealed to the cup with heat and pressure suited to the packaging structure.

  5. Cutting and product discharge

    Sealed cups are separated at the cutting station and transferred to downstream handling or case packing.

What information is needed for an H20 project?

A correct configuration requires the product sample, target fill, cup dimensions, bottom and top film structure, shift duration, target output and site utilities.

  • Product and flow characteristics
  • Target portion and cup geometry
  • Bottom film and lid-foil properties
  • Shift plan and net output target
  • Electrical, compressed-air and cooling utilities

Technical Drawing

A scaled technical schematic showing the machine’s working principle and the main stations along the line.

H20 H20 Cup Water Filling and Sealing Machine — Technical Drawing
H20 Cup Water Filling and Sealing Machine · Cup Water Packaging Machine

Technical Specifications

The values below refer to the H20 reference configuration. Actual output varies with product properties, packaging material, cup dimensions and fill weight.

Mould dimensions162 × 410 × 90 mm
Mould / Cavities20 cavities
Capacity20–25 cycles/minute
Roll diameterBottom film 1000 · Lid film 300 mm
Roll core diameter76 mm
Electrical supply380 V · 3~ · 50–60 Hz
Dimensions1.200 × 7.000 × 2.400 mm
Weight3.000 kg
Body material304–316 grade stainless steel
Compressed air3.000 L/min · 6–8 bar
Cooling requirement10.000 kcal/h · 10–14 °C
Bottom filmPET · 550–900 micron
Top filmHeat-sealable lacquered aluminium, PVC or OPP laminate

Products that can be packed with H20

The filling unit is engineered for the product flow and target portion. The visuals below show typical H20 cup applications.

Square drinking-water cups filled and foil-sealed on the H20 line
H20Drinking WaterPrecise filling and leak-resistant foil sealing in square cups
Square ayran cups suitable for H20 filling and sealing
H20AyranControlled portioning with a filling system selected for the product
Square fruit-juice cups that can be packed on the H20 machine
H20Fruit JuiceLiquid-appropriate dosing and heat-sealed foil closure
Square iced-tea cups foil-sealed on the H20 line
H20Iced TeaConsistent filling and secure sealing for cold beverages

Frequently Asked Questions

What is the H20 production capacity?

The H20 mechanical range is 20–25 cycles/minute. Net hourly output is calculated from the product, fill amount, cup size, films and downstream equipment.

Does H20 use preformed cups or form the cups itself?

In the reference configuration, cups are formed from PET bottom film inside the machine, then filled, foil-sealed and cut on the same line.

Which products can be packed with H20?

Typical applications include drinking water, ayran, fruit juice and iced tea. Viscosity, foaming, filling temperature and shelf-life targets are assessed for each product.

Which packaging films does H20 use?

The reference setup uses 550–900 micron PET bottom film and heat-sealable lacquered aluminium, PVC or OPP laminated top films. Final selection follows forming and seal tests.

Which utilities are required for H20 installation?

Reference utilities are 380 V three-phase power, 3,000 L/min compressed air at 6–8 bar and about 10,000 kcal/h cooling at 10–14 °C. Site utilities are confirmed before delivery.

How does quotation and engineering proceed?

We review the product sample, target portion, cup and film data, shift plan, output target and site utilities. The proposal then defines mould, filling system, layout, options, tests, installation and training.

Güven sinyalleri

H20 Cup Water Filling and Sealing Machine için güven ve doğrulama

Bu model için teklif öncesinde ürün numunesi, hedef kapasite, tesis altyapısı, yedek parça ve servis kapsamı teknik ekip tarafından birlikte doğrulanır.

10+yıllık saha deneyimi
45+ihracat ülkesi
1200+kurulu makine
148tamamlanan proje
Üretici kimliği

Açık iletişim ve tesis bilgisi

SUQPACK, Çerkezköy / Tekirdağ merkezli makine üreticisi olarak adres, telefon ve e-posta bilgilerini sitede görünür tutar.

İletişim bilgileri
Mühendislik

Teknik ekip tarafından hazırlanan içerik

Ürün ve rehber içerikleri; kapasite, film, proses, kurulum ve servis detaylarını ticari iddiadan çok teknik karar desteği olarak açıklar.

Teknik rehberler
Proje süreci

Keşiften devreye almaya net akış

Ürün analizi, hat planlama, üretim, test, kurulum, operatör eğitimi ve satış sonrası destek adımları proje bazında netleştirilir.

Proje yaklaşımı
Yasal şeffaflık

Gizlilik, KVKK ve kullanım metinleri

Kişisel veri, çerez, gizlilik ve kullanım koşulları için ayrı sayfalar bulunur; formlarda izin ve güvenlik kontrolleri uygulanır.

Politikaları incele
Doğrudan doğrulama

Teklif öncesi ürün numunesi, hedef kapasite, tesis altyapısı, yedek parça ve servis kapsamı teknik ekip tarafından ayrıca değerlendirilir.

+90 282 999 99 99[email protected]KVKK Çerez Politikası

Let’s choose the right machine for your project together

Let our engineering team plan the packaging line best suited to your product, capacity and budget. Getting a quote is free.

Get a Quote